PowerCool LB320 Standalone Thermal Controller

  • Standalone controller with Fuzzy Logic and large digital readout of actual temperature and set point.

  • 300 Watts of cooling power

  • Regulation +/-0.1 C with constant heat load.

  • RS485 or RS232 computer serial interface and remote Quick Set dial rapid set point input.

  • Over-Under temperature and no flow safety shutoff and alarm.

  • Compact case - 13” W x 14” D x 6.5” H, weighs only 15 pounds. Includes front handles.

  • Quick disconnects with shut offs for easy connection to thermal heads.

  • 16 step integral ramp-soak profile programmability.

  • Universal AC Power input.

  • Temperature range –40 degree C to + 125 degree C

  • Ultra quiet operation suitable for office areas.

  • Accept Thermocouple, RTD or thermal diode inputs

  • DC Thermal Power Shut-off switch.

 

PowerCool Modular Thermal Controllers

  • Modular Thermal Controllers for multiple controller systems, integration into customers test equipment, or used with low temperature chillers for extended temperature range.

  • Scaleable power supplies up to 500 watts.

  • Easily stackable multiple controllers for ultimate flexibility.

  • Over-Under temperature and no flow safety shutoff and alarm.

  • Miniature controller case : 4 “ W x 10” D x 2.5” H, weighs only 1 Lb.

  • RS232 or RS485 computer controllability, one PC can control 32 LB300-I’s with our PS100 Software.

  • 16 step integral ramp-soak profile programmability.

  • Universal AC Power input.

  • Temp. range –60 degree C to + 125 degree C

  • Ultra quiet operation suitable for office areas.

  • Accept Thermocouple, RTD or thermal diode inputs

  • DC Thermal Power Shut-off switch.

 

PowerCool Thermal Heads

  • High Power Heads: - 40C to +125C
      TH80: 80 watts power, Dim: 1.86” x 1.86” x 0.7”
      TH220: 220 watts power, Dim: 2.74” x 2.74” x 0.7”
      TH320: 320 watts power, Dim: 3.56” x 3.56” x 0.7”

  • Low Temperature Heads: -55C to + 135C
      TH80-2: 7 watts power, Dim: 1.86” x 1.86” x 1.0”
      TH200-2: 30 watts power, Dim: 2.74” x 2.74” x 1.0”

  • Heads can clip onto socket, mount to manual actuator, or can be screwed onto DUT Board.

  • Contact force adjustment knob for precise die contact.

  • Field changeable custom thermal adapters for use with multiple packages or sockets for maximum flexibility.

 

PowerCool Chillers

  • Full line of water chillers for lower temperature testing with LB300-i modular controllers. Enables lower temperature testing or cost effective multiple test heads in one area.

  • Manifolds available for supplying up to 5 Thermal Heads per chiller.

  • CH250 – Portable solid state chiller, 250 watts cooling power. 0 deg C minimum. Dimensions: 8” W x 11” D x 14.5” H

  • CH500 – Deskside bath style chiller. 500 watts cooling power. – 12 deg. minimum. Dimensions 10” W x 15 ½’ D x 25” H

  • CH750 – Deskside bath style chiller. – 750 watts cooling power. - 30 deg. minimum. Dimensions: 12” W x 18” D x 26” H

  • Negative pressure flow available on CH500 and CH750 chillers to ensure no leak operation.

 

PowerDrive Z-axis Actuators

  • Completely portable Cantilever Powerdrive Actuator systems for holding thermal head onto a wide variety of test boards.

  • Socket mounted Powerdrive attaches using existing mounting holes and fits within footprint of socket.

  • High volume ten-way Powerdrive with mounting space for DUT board and test peripherals.

  • Adjustable force and travel rate. Either pneumatic or manual actuators available.

  • Integral zero force spring loaded, ball bearing pivot Trigimbal for perfect die contact and soft contact.

 

PowerCool LB60 & TH60 Minature Active Thermal Control System

  • Complete miniaturized thermal control system with –15 Deg. C to +125 Deg. C temperature range.

  • 60 watts of cooling power, regulation +/- 0.1C with constant heat load.

  • Miniature case measuring only: 2.5” H x 4.0” W x 10.3” D, ultra quiet operation suitable for office environment.

  • Fuzzy logic controller with LED readout of actual and set point temperature. Over/Under temperature alarm.

  • Integral 16 step ramp soak programmability

  • TH60 thermal head mounts to test socket top using existing socket mounting holes. Customer replaceable thermal adapter for optimal flexibility

  • Pivot latch design for easy part change out, adjustable contact force for different packages. Suitable for all package styles, QFP, BGA, PGA etc.

  • Integral moisture seal for inhibiting moisture at low temperature testing.

  • Thermally isolated sensor for true case temperature control.

 

Silicon Thermal manufacture high performance thermal control solutions for the semiconductor test industry.

Offering complete thermal solutions which allow for control of a DUT IC from -55ºC to +155ºC. Being both quiet, compact & portable, Silicon Thermal PowerCool solutions enable testing virtually anywhere - be that in a laboratory or office environment.

Applications range from engineering characterization to high volume production test.

With simple setup and adjustment it's a true 5 minutes out of box to thermal testing solution!

Suppliers of Environmental Test Equipment since 1989

enquiries@p-t-s.co.uk

T: +44 (0)118 986 2000

F: +44 (0)118 986 2800

Unit 1 Manor Commercial Centre

12 Commercial Road

Reading

Berkshire    RG2 0QJ

United Kingdom

Follow us

  • Facebook - Black Circle

website v 19.9 ©2019 PTS Ltd