MPI THERMAL

Products
 

TA-5000 Thermal Air Stream

The ThermalAir TA-5000 series of temperature test systems brings precise temperature control to the test site for semiconductor ICs, electronic components, hybrids, printed circuit boards and other devices. This enables the user to integrate temperature into any test setup for thermal profiling, temperature characterizing and performing fault analysis for applications such as aerospace, RF microwave, fiber optic components, automotive parts, electronic sensors or any electronic and non-electronic devices.

  • -80 to +225ºC temperature range

  • -55 to +125ºC / +125 to -55ºC in less than 10 seconds

  • Extremely Low Audible Noise

  • Glass Thermal Cap sizes: 2.5" to 10" diameter

  • Ultra Stable DC Temperature Control

  • Frost Free Operation / Built-in Air Dryer

  • No LN2 or CO2 required

  • DUT control

  • Two user touch screen interfaces (on A model)

  • USB & SSD Thermal File Management and Data Logging

  • Easy Roll Around wheels for portability

 

Clamshell MicroChamber & Flex Hose

ThermalAir Compact Benchtop Environmental Test Chamber is for Temperature Testing all types of components such as Automotive Sensors, Fiber Optic Components, Microwave Hybrids, MCM, PCB, or type Electronic Components / Non-Electronic parts.

ThermalAir Clamshell Benhtop Environmental Chamber can be opened and closed for quick and easy loading / unloading parts that need temperature test and thermal conditioning. Temperature test your electronic / non-electronic parts and other devices at temperatures from -60° to +150°C with a temperature accuracy and uniformity, unmatched by large environmental chambers.

 

Thermal Hood

ThermalAir Compact Chamber Hood is for Temperature Test Enclosure for all types of components such as Automotive Sensors, Fiber Optic Components, Microwave Hybrids, MCM, PCB, or Electronic Components / Non-Electronic parts.

ThermalAir Compact Hood Chamber is a thermal test enclosure that can be raised and lowered down over electronic components under test for quick and easy loading / unloading parts that need temperature test and thermal conditioning. Temperature test and cycle your electronic / non-electronic parts and other devices at temperatures from -60° to +200°C with a temperature accuracy and uniformity, unmatched by large environmental chambers.

Also suitable for use with vibration tables where a standard "hole in the bottom" chamber doesn't offer quick enough response times.

 

TA-3000A Thermal Air Stream

The ThermalAir TA-3000 high capacity thermal air stream system is used for temperature testing, fast thermal cycling, and device temperature characterisation of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature from -60°C to +225°C. 

 

  • -60ºC to +225º temperature range

  • Eco-Friendly with up to 50% power energy savings

  • Quiet low audible noise for engineering laboratory

  • No LN2 or CO2 required [ Built in Chiller & Air Dryer ]

  • Ultra Cold Temperatures are maintained at 50Hz or 60Hz.

  • ThermalAir Colour Touchscreen GUI

  • Plug-in Anywhere from 200 to 250VAC. No need for user voltage re-configuration when system moved to different locations.

  • USB and SSD for thermal file management and data logging.

  • A separate temperature controlled dry air purge for keeping surrounding test area frost free operation during long test times at extreme cold temperatures.

  • Two User Control Modes – Standard Operator & Temperature Cycle (Temp Cycle, Ramp & Soak).

  • User Interface and Operations – Remote Control Compatible Modes for existing user test programs.

    • Center Control Colour Touch Screen Display

    • IEEE-488.2(GPIB), USB, Ethernet, Serial, LXI

    • Intranet via LAN

    • LabVIEW drivers

TA-1000A ThermalAir Desktop System

The ThermalAir TA-1000 high capacity thermal air stream system gives the user full temperature control and portability. The system includes full GUI touch screen display, remote user interface rear panel, rear output gas hose and microscope style Thermal Head and Hose arm and stand.

The ThermalAir TA-1000 high capacity thermal air stream system is used for temperature testing, fast thermal cycling, and device  temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise
temperature from -20°C to +200°C.

  • ThermalAir Colour Touchscreen GUI

  • Plug-in Anywhere from 200 to 250VAC. No need for user voltage-configuration when system moved to different locations.

  • USB and SSD for thermal file management and data logging.

  • Two User Control Modes – Standard Operator & Temperature Cycle (Temp Cycle, Ramp & Soak).

  • User Interface and Operations – Remote Control Compatible Modes for existing user test programs

    • IEEE-488.2(GPIB)

    • RS-232 Serial

    • USB

    • Ethernet : LAN/LXI

    • LabVIEW drivers

  • T=Type and K-Type Thermocouple DUT temperature control sensor inputs on the rear panel.

  • 19 inch rack mount system configuration available 

 
 

TC-100 ThermalAir Chiller System

The MPI ThermalAir TC-100 high capacity thermal air process chiller system is used for temperature testing and localised temperature inducing of continuous -80°C Clean Dry Air at output cold gas flow upto 24SCFM.

 

MPI ThermalAir TC-100 Gas Chiller provides a direct stream of continuous clean dry cold air directly to the area that needs to be temperature test. Environmental stress screening, temperature conditioning, thermal shock and other temperature test requirements is what the ThermalAir temperature systems bring to the test.

The MPI ThermalAir TC-100 high capacity thermal air process chiller system is used for temperature testing and localised temperature inducing of continuous -80°C Clean Dry Air.

An Alternative to LN2 and or CO2 in many applications

  • Built-in Air Drying System

  • Energy Efficient Ultra-stable DC Chiller

  • RS-232 Remote On/Off Power & Output Flow

  • One-Touch On/Off Flow Button

  • No LN2 or CO2 Required

  • Plug-in Anywhere Worldwide

  • No Configuration Needed

MPI Thermal temperature systems have advanced technology in precise localized hot and cold temperature test equipment. The thermal division has 60 years of combined thermal control system experience. This has brought about a thermal air stream system for today’s manufacturers environmental test chamber needs. We have designed a system that provides accurate temperature control at the test site as a convenient alternative to larger temperature chambers and liquid baths.

MPI Thermal is a division of MPI Corporation. MPI Corporation was founded in July, 1995 and has enjoyed growth well beyond industry standards due to an infusion between customer centricity, industry leading technology development, advanced manufacturing techniques and world class customer support. In addition, having four vertical markets spanning across a wide variety of industries has fuelled consistent MPI growth.

Suppliers of Environmental Test Equipment since 1989

enquiries@p-t-s.co.uk

T: +44 (0)118 986 2000

F: +44 (0)118 986 2800

Unit 1 Manor Commercial Centre

12 Commercial Road

Reading

Berkshire    RG2 0QJ

United Kingdom

Follow us

  • Facebook - Black Circle

website v 19.9 ©2019 PTS Ltd