top of page
top

Grip Rings / Expander Rings

Aluminium & Plastic 2 part rings for wafer handling and die separation.

​

  • For 3" to 8" wafers

  • Colour coded rings

  • Custom Rings upon request

grp

to top

Film Frames / Wafer Saw Frames

Stainless Steel, Aluminium & Plastic frames for wafer handling and die separation.

​

  • For 3" to 12" wafers

  • Compatible part numbers to Disco, K&S etc

  • Available finshes:

    • Electropolish (Standard)

    • Hard Chrome (Optional)

    • Alodine - Gold (Standard for Aluminum)

  • Other options​

    • Recessed Barcode Pads

    • Custom Machining

    • Custom Engraving

    • Custom Frames upon request

ff

Aluminium Tubes & Rails

Extruded Aluminium tubes for component / device handling.

​

  • Length to suit - Standard 21"long

  • Lead-ins for ease of device acceptance

  • Crimped ends

  • Optional high temp silicone bungs

  • Custom Engraving

  • Custom Machining

Boat Magazines

Extruded Aluminium and Stainless Steel magazines for Boat / Process Carrier Handling

​

  • Length to Suit (Standard is .050" longer than Boat Length)

  • Lead-Ins for ease of Boat acceptance (Standard on ALL Aluminium Magazines)

  • Dust Covers

  • Handle

  • Finger Grips

  • Custom Machining

  • Custom Engraving

  • Custom Magazines upon request

tubes

to top

boat

Film Frame Magazines

Extruded Aluminium magazines for Film Frame Handling

​

  • Length to Suit

  • Lead-Ins for Frame acceptance  (Standard on ALL Magazines)

  • Dust Covers

  • Handle

  • Locking Gates

  • Custom Machining

  • Custom Engraving

  • Custom Magazines upon request

ffm

Grip Ring Magazines

Extruded Aluminium magazines for Grip Ring Handling

​

  • Length to Suit

  • Lead-Ins for Frame acceptance  (Standard on ALL Magazines)

  • Dust Covers

  • Handle

  • Locking Gates

  • Custom Machining

  • Custom Engraving

  • Custom Magazines upon request

grm

to top

Lead Frame Magazines

Extruded Aluminium magazines for Lead Frame / Strip Handling

​

  • Front of Line through End of Line

  • Length to Suit

  • Lead-Ins for Frame acceptance  (Standard on ALL Magazines)

  • Dust Covers

  • Handle

  • Locking Gates

  • Custom Machining

  • Custom Engraving

  • Custom Magazines upon request

lfm

Multiple Channel Magazines

Extruded Aluminium Multiple Channel magazines for component / device Handling

​

  • Bake

  • Burn-In

  • Dry Packing

  • Fine Leak

  • Gross Leak

  • Testing

  • Trim & Form

mcm

Miscellaneous Magazines

Extruded Aluminium magazines for process handling  of miscellaneous electronic strips / housings.

Printed Circuit Boards Magazines

Aluminium & Stainless Steel magazines for PCB handling.

Shippers for Film Frames & Grip Rings

Designed to protect unsawn/sawn wafers during transportation and storage.

​

  • Clear Anti-Static (Standard)

  • Black Conductive - Styrene (Optional)

misc
pcb
shippers

to top

Stack Magazines

Aluminium & Stainless Steel End of Line (EOL) magazines for Lead Frame & Strip Handling

​

  • Lead Frame Handling during Molding

  • Lead Frame Handling during Plating

  • Lead Frame Handling during Marking

  • Lead Frame Handling during Baking

  • Lead Frame Handling during Trim & Form

Substrate / MCM Magazines

Aluminium & Stainless Steel magazines for Substrate Handling

​

  • Substrate / MCM Handling during Wire Bond

  • Substrate / MCM Handling during Die Attach

  • Substrate / MCM Handling during
    Chip Placement

  • Substrate / MCM Handling during Baking

  • Substrate / MCM Handling during Trimming

  • Substrate / MCM Handling during Testing

stack
substrate

TAB Magazines

Extruded Aluminium magazines for TAB Carrier Handling

​

  • In-Line TAB Handling

  • In-Line TAB Processing

TO Tape Magazines

Extruded Aluminium magazines for TO Tape Process Handling

​

  • Tape Handling during Die Attach

  • Tape Handling during Wire Bond

  • Tape Handling during Sealing

  • Tape Handling during Testing

  • Tape / Part Storage

tab
to

Wafer Carriers

Extruded Aluminium magazines for Bare Unsawn Wafer Handling

wafer

to top

Perfection Products, Inc. started in 1971 as a one-man machine shop. Over the years their progress has been astounding and closely parallels the rapid leaps made in the semiconductor and electronics industries.

​

The business has evolved from operating out of a small one-car garage to its present location, a newly constructed 35,000 square feet state-of-the-art manufacturing facility.

​

One reason for this steady growth has been due to Perfection Products creation of the one-piece extruded magazine. This revolutionary concept has made Perfection Products, Inc. a well-respected name in the semiconductor industry worldwide over the past four decades.

In addition, their commitment to personal service, high standards of quality control, and their skilled, energetic, and experienced craftsmen keeps Perfection Products, Inc. the leading designer and manufacturer of Front-of-Line through End-of-Line processing products which exceeds their customer's demands.

bottom of page